Pump Protection FTW360 - Compact Flush-Mounted Probe
The FTW360 is made for detection of liquids on the suction side of a pump for dry run protection.
It operates in all conductive liquids, sludges and pastes that do not form an insulated build-up on
the wall of the piping (e.g. oil film). The unit is also suitable for minimum or maximum detection in tanks.
Benefits
-
Simple and reliable solution also for adhesive or viscous products
-
Cost-effective probe for conductive liquids
-
Universal electronics for AC and DC voltages
Field of application
For detection of liquids on the suction side of a pump for dry run protection. For conductive liquids,
sludges and pastes that do not form an insulated build-up on the wall of the piping (e.g. oil film).
For minimum or maximum detection in tanks.
-
Process connection: Thread
-
Sensor length: Flush-mounted
-
Temperature: -20 to +100°C (-4 to +212°F), CIP to 130°C, for ½ h
-
Pressure: -1 to 10bar (-14.5 to 145psi)
Features and specifications
| Measuring Principle | Conductive | |
| Characteristic / Application |
Compact limit switch for pump protection, Active build up compensation, Flush mounting |
|
| Supply / Communication |
21V ... 253V AC 20V ... 200V DC |
|
| Ambient temperature |
-20 °C ... 60 °C (-4 °F ... 140 °F) |
|
| Process temperature |
-20 °C ... 100 °C (-4 °F ... 212 °F) |
|
| Process pressure absolute / max. overpressure limit |
Vacuum ... 10 bar (Vacuum ... 145 psi) |
|
| Min. conductivity of medium | 10 µS/cm | |
| Main wetted parts | 1.4571, PTFE | |
| Process connection | G3/4 | |
| Output | Relay | |
| Specialities | CIP suiteable | |
| Application limits | Observe minimum medium conductivity | |
